A to Z Product List >

Cable Expert

AT/CX/CM Series

The VeEX® AT/CX/CM series are next generation test solutions designed for analog and digital cable TV networks supporting VoIP, WiFi, and Internet service. Analog and Digital SLM, ingress noise sweep, deep interleave support, and QAM constellation analysis are among many standard features. Enhanced optional features include QAM16/64/128 Upstream Generation (USG), Reverse Path QAM Analysis, and DOCSIS 2.0/DOCSIS 3.0 Cable Modem emulation. A high capacity LiIon battery pack provides extended autonomy for a full day use with only a single charge.



Designed for digital cable TV, DOCSIS 3.1, OFDM, Satellite and over-the-air digital TV signal analysis and measurements, VeEX’s new AT2500-3G is the industry’s most complete 3 GHz advanced spectrum analyzer and multi-standards test solution.


The new CX310 is equipped with a true DOCSIS 3.1 / 32x8 Cable Modem supporting OFDM measurements as well as VeTest throughput capabilities. Comprehensive SLM features include Single Channel, Full System Scan, Tilt and Ingress Scan. These key capabilities are the basis of the Home Installation Process (HIP) Auto test, enabling Home Certification conformance testing.


The CX350s-D3.1 is a portable, all-in-one test solution for legacy analog and digital Cable TV networks, supporting SLM, DOCSIS 3.0/3.1, Ethernet, and T1 test capabilities.


The CX380s-D3.1 is a next generation test solution designed for analog and digital cable TV networks with enhanced spectrum anaylsis, digital channel, DOCSIS 3.0/3.1, Sweep, MPEG analysis and Ethernet test capabilities.

CX150-D3+ (red)

The compact, handheld CX150-D3+ is comprised of a feature rich SLM with an embedded DOCSIS 3.0 Cable Modem supporting full 8x4 Channel Bonding.


CX350s, industry's first integrated test solution supporting legacy analog CATV signals, high definition DVB-C carriers and DOCSIS 3.0 cable modem emulation/measurement in a single instrument.


The CX380s-D3 is a super-tech installation and maintenance tool for next generation CATV networks. Equipped with a large 7" touch-screen color LCD and intuitive graphical user interface, the CX380s-D3 can be used under all light conditions.


The AT2500RQvPlus is the industry’s most complete spectrum analyzer, combining superior QAM analysis and best-in-class analog measurement capability. The enhanced AT-Web automates both the analog and digital proof-of-performance tests, saving time, making tests consistent, and providing excellent documentation.


The CM3000 and CM3800 analyze Upstream and Downstream network performance for business and bundled services. Both instruments validate the effectiveness of DOCSIS 3.0 services.


The CX180F is a rackmount monitoring system to check the performance of analog and digital channels being transmitted downstream or toward customers across a CATV HFC network.


This rackmount headend system completes the requirement of DOCSIS 3.0 deployment where higher QAM on the return path becomes necessary and mandatory.


As part of VeEX's VeSion system, the CX380X features an advanced Spectrum Analyzer, QAM Health, and Burst QAM Demodulator capabilities. The CX380X provides a series of expert measurements for detection of rogue cable modems, enabling identification of potential network-affecting issues.


The RealWORX Web Performance Verification System allows operators to monitor return ingress levels, analog signal performance, as well as QAM performance and statistics from many nodes using any browser interface. RealWORX compares RF performance against user-set limits and generates an alarm when signal impairments are detected. The system sends alarm notifications by email, pager, or cell-phone, and can report to the NOC via an SNMP trap interface to ensure that the operator is notified promptly when an alarm occurs.


The AT1700M/AT1600E series multiplexer is a high performance cost-effective broadband RF switching solution. Combined with the AT2500 series spectrum analyzers, the AT1700M/AT1600E multiplexer is the ideal solution for headend testing and return path monitoring.


A next generation CATV installer meter to characterize and measure Analog and Digital video signals.


Adds DOCSIS Upranging function to CX100+.


Equipped with the same base feature set as the CX100+, the CX120+ boasts the industry’s first Upstream Signal Generator with FEC capabilities as an option.


An all-in-one, super-tech installation and maintenance tool for next generation CATV networks.


This palm-size, lightweight TDR is an ideal tool for coaxial and twisted pair cable fault location.


The CX10/CX10+ is a handheld Cable Length Meter that employs Fast-edge Step Time Domain Reflectometer (TDR) technology to measure the length of power and telecom cables.