DOWNLOADS

  • Specification Sheet
  • User's Manual
  • Technical Notes
  • Software

Contact factory

View >

Related Products

  • TX130/E+
  • TX130M+
  • TX150/E+ (red)
  • TX300s
  • UX400

TX130/E+

DSn/PDH, Datacom and Ethernet network testing simplified

The TX130/E+ platform offers customers a single, multifunctional access network diagnostic tool. Equipped with PDH/DSn, Datacom, G.703 64k Codirectional and Ethernet interface options, the TX130/E+ performs traditional ITU-T/ANSI transmission tests required by large telcos and wireless/mobile operators, Datacom tests for networks operating "V" type interfaces, as well as Ethernet tests for newer, IP-based networks. The TX130+ can also be equipped with ISDN PRI and VF channel analysis. The TX130/E+ is designed for field engineers that need an easy-to-use, handheld and battery-powered field unit. To simplify and ensure rapid testing, the unit auto-configures itself to the signal detected, minimizing operator involvement.

PLATFORM HIGHLIGHTS

  • Intuitive presentation of measurements with test graphics
  • High resolution color touch-screen viewable in any lighting conditions fitted with protective cover
  • Robust, handheld chassis packed with powerful and flexible features for demanding environments and test conditions
  • Optimized for field engineers or technicians installing and maintaining transporting legacy network
  • Ethernet port and connection for back office applications, workforce management and triple play service verification
  • User defined test profiles and thresholds enable fast, efficient and consistent turn-up of services
  • USB memory stick support and FTP upload capability for test result storage and file transfer respectively
  • Maintain instrument software, manage test configurations, process measurement results and generate customer test reports using included ReVeal™ PC software
  • Extend field testing time using interchangeable LiIon battery pack/s. Greater battery autonomy provided in standby mode
  • Supports advanced IP testing; Ping, trace route, ARP Wiz, VoIP, IPTV, WiFi, web browser, and FTP upload/download via Ethernet or USB port where applicable
  • Perform remote testing and monitoring using the remote control option via standard Ethernet interface

KEY FEATURES

  • Supports DS1/E1, DS3/E3, DSn/PDH bit rates
  • G.703 64k Codirectional interface testing
  • Balanced (120Ω) and Unbalanced (75Ω) interfaces for E1
  • Balanced (100Ω) and Unbalanced (75Ω) interfaces for DS1
  • Dual DS1/E1 Transmitters & Receivers for bi-directional testing
  • Full Rate DS1/E1 and Fractional N, Nx64 kbit/s or Nx56 kbit/s testing
  • Dual DS3/E3 Receiver
  • Non-intrusive Pulse Mask Analysis at DS1, E1 and E3, DS3 bit rates
  • Level and Frequency measurements
  • Auto Configuration of network type, bit rate, line coding, framing, and test pattern
  • Bit Error and Performance Analysis per ITU/Bellcore standards
  • Error and Alarm Generation and Analysis
  • Histogram and Event analysis for errors and alarms
  • Round Trip Delay on all interfaces
  • Transmit Frequency Offset to stress clock recovery circuits
  • DS1 and DS3 Loop capability
  • Datacom interface for RS-449 (422 and 423), X.21, V.35 and V.36
  • Synchronous/asynchronous DTE/DCE mode of operation
  • 10/100/1000-T Ethernet Testing for BERT, Throughput, Loopback and RFC2544 in single stream
  • VF drop/insert by headset
  • VF frequency/level measurement and VF send tone
  • ISDN PRI (ANSI and ETSI) call set up
  • Jitter analysis on all rates