• Specification Sheet
  • User's Manual
  • Technical Notes
  • Software

Contact factory

View >

Related Products

100G Universal Module


Equipped with dual next-generation optical transceiver ports and optional legacy test interfaces, the RXT-6200 module is a perfect complement to the RXT Platform, extending its testing range to 100 Gbps and offering up to two independent tests.

Installation, commissioning, monitoring and maintenance tasks are simplified thanks to a combination of intuitive features and powerful test functions. Novice users benefit from the easy-to-use GUI, while experienced users will appreciate an array of advanced features such as OTL/PCS, CAUI-4/XLAUI Lane BERT, overhead monitor/control, Tandem Connection Monitoring, Service Disruption, Protocol Capture/Decode, BERT, Throughput test, and much more.



  • Independent Dual-Port testing, up to 2x 112G
  • CFP4 (LR4 & SR4) and QSFP28 interfaces for 100GE, OTU4 and 50GE applications
  • Supports IEEE 802.3bj Clause 91 RS-FEC as required for SR4
  • QSFP+ for 40GE, OTU3
  • SFP28 interface for 25GE, 16G FC, 32G FC and 24G CPRI applications
  • SFP+ for 100Base-FX, 1000Base-X, 10GEBase-X, OTU2/2e/1e/1, STM-64/16/4/1/0, OC192/48/12/3/1, and Fibre Channel 1/2/4/8/10/16G and CPRI up to 12G applications
  • RJ45 for 10/100/1000Base-T applications
  • External clock interfaces
  • 150 ppm clock offset generation

Ethernet Testing

  • Optical 100 Mbps to 100 Gbps Ethernet testing, including 25GE and 50GE
  • Electrical 10/100/1000 Mbps Ethernet testing
  • Dual-port testing capabilities
  • Optical Lane BERT and CAUI-4/XLAUI Lane BERT
  • PCS Layer Testing with Skew generation/monitoring
  • Multi-stream testing up to 32 independent streams
  • IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, and MPLS-TP OAM support
  • RS-FEC support for SR4 and SR10 transceivers
  • Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB, EoE support
  • MAC flooding
  • RFC2544 and V-SAM (Y.1564) testing
  • IPv4 and IPv6 traffic generation
  • BERT and Throughput testing at Layer 2 and Layer 3
  • Smart Loopback mode for Layer 2 and Layer 3
  • One-Way-Delay latency measurement (GPS assisted)
  • Line rate packet capture with Wireshark™ decode
  • Error and Alarm Injection

CPRI Testing

  • Common Public Radio Interface standard (CPRI) link performance verification
  • Supports all Rate Options up to CPRI 10 (from 614.4 Mbps to 24.33 Gbps) per CPRI Specification v7.0
  • Layer 2 Framed BER testing with PRBS stress patterns
  • REC/BBU (master) and RE/RRH (slave) emulation
  • Latency measurements
  • Dual-port operation and bi-directional monitoring mode

Fibre Channel

  • Storage Area Networks (SAN) testing for 1G, 2G, 4G, 8G, 10G, 16G and 32G interfaces
  • BERT and Throughput test
  • RFC2544: Throughput, latency, frame loss, back to back tests Layer 1 and layer 2 loopbacks

OTN Testing

  • OTN testing for OTU1, OTU2, OTU1e, OTU2e, OTU3 and OTU4
  • Complete multi-stage Mapping/Multiplexing
  • Advanced multi-step Map/Mux with SDH/SONET/PDH/DSn test payloads*
  • Ethernet over OTN (EoOTN)
  • ODUflex into ODU2, ODU3 and ODU4 with Bulk payload
  • Service Disruption Time (SDT)
  • Tandem Connection Monitoring
  • Overhead monitoring and generation
  • Terminate, Payload Through and Line Through test modes
  • Per-lane optical power and frequency measurements
  • External clock reference interface
  • Histogram Analysis


  • Available as Line Rate or mapped into OTN payloads
  • STM-0 to STM-64 and STS-1/OC-1 to OC-192
  • Advanced multi-step Map/Mux with PDH/DSn test payloads
  • Test payload multiplexing down to VC11/VT1.5 and internally generated PDH/DSn tributaries

PDH/T-Carrier Testing

The test set provides optional legacy SDH/SONET/PDH and DSn test interface capabilities and sub-rates from 155M (STS3/STM1), 55M, (STS1/STM0), 140 Mbps (E4), 34 Mbps (E3), 2 Mbps, 45 Mbps (DS3), 1.5 Mbps (DS1), and G.703 64k codirectional.

 * Consult factory for availability.